Arduino 08 and 13

int sensorPin = 0; // select the input pin for the potentiometer
int ledPin = 13; // select the pin for the LED
int sensorValue = 0; // variable to store the value coming from the sensor
void setup() {
 pinMode(ledPin, OUTPUT); //declare the ledPin as an OUTPUT:
}
void loop() {
 sensorValue = analogRead(sensorPin);// read the value from the sensor:
 digitalWrite(ledPin, HIGH); // turn the ledPin on
 delay(sensorValue); // stop the program for  milliseconds:
 digitalWrite(ledPin, LOW); // turn the ledPin off: 
 delay(sensorValue); // stop the program for for  milliseconds:
}

int sensePin = 2; // the pin the FSR is attached to
int ledPin = 9; // the pin the LED is attached to (use one capable of PWM)
void setup() {
 Serial.begin(9600);
 pinMode(ledPin, OUTPUT); // declare the ledPin as an OUTPUT
}
void loop() {
 int value = analogRead(sensePin) / 4; //the voltage on the pin divded by 4 (to 
 //scale from 10 bits (0-1024) to 8 (0-255)
 analogWrite(ledPin, value); //sets the LEDs intensity proportional to 
 //the pressure on the sensor
 Serial.println(value); //print the value to the debug window
}

Comments are closed.